PE32 / PE40
Low-density grades for flexible laterals, small-scale irrigation, and rural water schemes.
PE63
Medium-density pipe offering structural integrity for medium-pressure water distribution.
PE80
Highly resistant to environmental stress cracking; standard for gas and water mains.
PE100 / PE4710
Maximum strength grade for high-pressure industrial and municipal infrastructure.
PN4
Low pressure: Drainage and gravity-fed systems.
PN6
Irrigation: Standard farm water distribution.
PN8
Medium: Rural pumping and household supply.
PN10
Standard: Industrial and municipal water mains.
PN12.5
High Pressure: Heavy duty fluid transport.
PN16
Extreme: Fire mains and deep borehole pumps.
PN20
Industrial: Specialist high-load processes.
PN25
Maximum Safety: Critical mining and chemical lines.
Solid Wall
Uniform thickness for maximum internal pressure resistance.
Corrugated (Single/Double Wall)
Type C/S for heavy external loads in drainage and culverts.
Perforated
Sub-surface drainage with precision-cut slots for groundwater control.
Multilayer
Co-extruded layers for UV, chemical, or microbial protection.
Water (Potable)
Blue or black with blue stripes for drinking water identification.
Gas (LPG/Natural)
Yellow or black with yellow stripes for gas safety compliance.
Industrial
Solid black/colors for chemical transport and UV stabilization.
Roll: Flexible
Supplied in long continuous coils to minimize joints.
Butt-Weld / Electrofusion
Heat-fused joints creating a seamless, leak-proof system.
PVC-U (Unplasticised)
Standard rigid PVC (white/grey) for plumbing and drainage.
CPVC (Chlorinated)
High-temperature resistance for hot water and chemical lines.
PVC-O (Oriented)
Thinner walls with higher impact and pressure resistance.
Modified PVC (PVC-Hi)
Impact-modified for maximum durability in harsh environments.
Schedule 40
Standard thickness for common plumbing and drainage.
Schedule 80
Heavy-duty wall for industrial high-pressure systems.
DWV (Drain, Waste, Vent)
Non-pressure waste-water management.
Pressure Pipes
Tested for high-PSI pumped water delivery.
Electrical Conduit
Flame retardant and UV resistant wire protection.
SWR Pipes
Soil, Waste & Rainwater pipes for vertical building stacks.
Column & Casing Pipes
Precision-threaded pipes for borehole linings and pump support.
Butt Fusion / Welding
Standard hydraulic fusion for monolithic pipe joining.
Electro Fusion
Built-in heating coils for automated, high-precision joints.
Compression Fitting
Mechanical "no-glue" joints for quick on-site installation.
Socket Fusion
External heating joints for small diameter HDPE lines.
Mechanical Bolt Couplings
Steel housings for transitioning to valves and metal pipes.
Elbows, Tees & Crosses
Standard routing and branching shapes (90°, 45°).
Reducers & Caps
Sizing transitions and end-of-line sealing.
Solvent-Weld (Glue)
Slip and spigot joints using specialized chemical bonding.
Threaded (MPT/FPT)
Mechanical screw-in ends for pumps and valves.
PVC & Rubber
Helix-reinforced flexible hoses that resist collapse under vacuum.
Hard vs Flexible
Rigid drafting pipes vs maneuverable field hoses.
Ball & Butterfly
Quarter-turn rotary valves for fast isolation.
Gate & Globe
Linear multi-turn valves for precise throttling.
Check & Relief
Self-actuated safety and backflow prevention.
Solenoid
Electric actuation for automated irrigation control.
Plastic vs Metal
PVC/PP for water vs Brass/SS for industrial heat.
Flanged & Stub Spigot
Heavy-duty "belt and braces" design for large outlets.
Standard & Single-Screw
Fast branching from mainlines without cutting.
Double-Screw & Boss
High-security clamping with stub collar stability.